Best 10 Inch Car Subwoofers for Deep Bass (Hardest Hitting)

The 10 inch subwoofer is the most popular size for car audio systems, always has been and probably always will be. If you want to achieve something between almost good sound quality and great sound quality, then you will need a 10″ subwoofer.

If you are searching for the best 10 inch car subwoofer for deep bass and are looking to upgrade your car audio system, then you should pay attention to this article. We will help you make an informed choice.

Our Top Picks:

  1. Rockford Fosgate P300-10 – Hardest Hitting 10 Inch Subwoofer
  2. Rockford Fosgate R2
  3. Rockville RW10CA
  4. Kicker 44DCWC102 – Best 10 Inch Competition Subwoofer
  5. MTX Magnum MB210S – Best 10 Inch Subwoofer and Amp Combo
  6. Alpine R-W10D4
  7. Dayton Audio RSS265HO-44
  8. Skar Audio SDR-10 D4
  9. Infinity REF1000S – Best 10 Inch Shallow Mount Subwoofer
  10. BOSS Audio Systems CXX10 – Cheap 10 Inch Subwoofer

What Are the Best 10 Inch Subwoofers for Cars?

1. Rockford Fosgate P300-10 – Hardest Hitting 10 Inch Subwoofer

The Rockford Fosgate P300-10 Punch Subwoofer is a very powerful subwoofer with a sealed enclosure that is capable of producing 300 watts of output. The sub features a 10″ woofer with a 12db/Octave low pass crossover and an adjustable bass EQ.

The sub also features an adjustable 0°/180° phase switch and a remote bass level control that can be used to fine tune the sound output. It has a built-in 0°/180° phase switch that allows for the use of the woofer to work with either the left or right channel. It also features a closed loop design that allows the subwoofer to work optimally within your car, home, or boat audio system.

It can easily be installed in aftermarket or OEM audio systems with the included wiring harness, power supply, speaker terminals, and screws. This subwoofer is ideal for people who want to upgrade their car audio systems with a powerful subwoofer.

So if you’re looking for a high-performance, long-lasting 10″ subwoofer, then buy the Rockford Fosgate P300-10 Punch Subwoofer. It’ll definitely make you feel satisfied, relaxed, and confident in your investment, and reduce your energy costs too.

2. Rockford Fosgate R2

The R2 Ultra is designed for the ultimate low-frequency experience and provides a clean, deep, smooth, and punchy bass response that you can feel in your chest. This sub is best used for movies, music, and games where you want a tight, powerful bass response.

The shallow design allows for an elevated motor structure that reduces speaker depth. This keeps it light and compact, allowing it to fit into tight spaces. These subwoofers are made for sealed rooms and have a low profile to keep the cabinets from resonating.

It’s rated at 200 watts RMS, and the 4-Ohm Dual Voice Coil design lets you wire them in various configurations. You can use them together for stereo or pair them up individually for mono applications.

The dual voice coils provide superior performance with more precise and accurate bass. They also allow for easy installation.

The sub’s design is pretty unique as well; it features an anodized aluminum voice coil former, which makes it look even better.

And thanks to its high-quality, mica-injected polypropylene cone material, this subwoofer is durable and long-lasting. You can use it for years without worrying about damage to the cone or the magnet structure.

3. Rockville RW10CA

The Rockville RW10CA is a 10″ car subwoofer that offers 800 watts of power and a frequency range of 20Hz–150Hz. This is perfect for most vehicles that have a trunk or boot space, like your SUV or hatchback. It also has a subsonic filter that lets you enjoy a wide range of music without the annoying rumble of the bass.

If you’re looking for the best 10-inch subwoofer that delivers great sound quality, then the RW10CA is definitely a great choice. It features soft-delayed remote turn-on technology, which makes it easy to adjust and enjoy your music at your own pace.

The Rockville has a dual-level input feature, so you can easily connect different devices to the subwoofer. It has adjustable input sensitivity, which lets you get the best performance out of your car speakers. You can also select whether you want the sub to be in a 0° or 180° phase. This will help you get better results when using it with other components.

It comes with a thermal protection circuit, a short-circuit protection circuit, and an overload protection circuit. This ensures that the subwoofer won’t overheat or fry itself while playing. It also comes with a subsonic filter that allows you to hear the bass at a lower frequency without any rumbling.

4. Kicker 44DCWC102 – Best 10 Inch Competition Subwoofer

The Kicker 44DCWC102 is a high-performance 10 inch subwoofer that delivers deep bass sound while fitting into a small footprint.

It uses a ported enclosure design that offers optimal bass response and deep, thunderous bass. This is a perfect choice if you want a powerful subwoofer that can fit in tight spaces and doesn’t take up too much trunk space.

It features a 1200W peak power rating and a 600W RMS power rating, making it ideal for any car audio system. It also has a 2 ohm impedance, which means it can handle high-current power applications without overheating.

The port design ensures optimal bass performance by directing the sound waves towards the front. It also allows the sound to spread out evenly throughout the room, so you get a much fuller sound experience without distortion.

The Kicker 44DCWC102 also has a custom port design that makes it easy to install. Plus, it has a heavy-duty MDF enclosure that’s strong and durable, so you don’t have to worry about it cracking or breaking.

5. MTX Magnum MB210SP – Best 10 Inch Subwoofer and Amp Combo

The MTX Magnum MB210SP is a high-quality, high-power, dual 10″ enclosure and amplifier combo from MTX. This thing sounds amazing and is great for both home and mobile use. If you’re looking for a powerful amp that can handle your subwoofers, the Magnum MB210SP has you covered.

This MTX combo amp is rated for up to 1200W of peak power (800W RMS) and includes two 10″ MTX/Magnum subwoofers. It has an aviation grade carpet for durability and a heavy duty 5/8″ MDF construction.

All of this is wrapped in a rugged exterior with heavy duty wiring terminals for longevity. And with a max power of 1200W, it’s got plenty of power to handle whatever you throw at it.

6. Alpine R-W10D4

The Alpine R-W10D4 is a powerful, efficient, and versatile subwoofer with the most advanced design. It’s capable of producing some serious bass, and it’s a good choice for anyone looking for the best 10 inch subwoofer at an affordable price.

The driver itself has a parabolic pulp/kevlar cone that’s capable of producing high frequencies with great efficiency. This allows the sub to produce a full range of sound with just one driver. And because of this, it’s able to produce deep bass at lower volumes.

The Alpine R-W10D4 also comes with an integrated High-Amp Rating (H.A.M.R.) surround, which helps it produce deeper bass with less distortion and a better overall sound.

H.A.M.R. is a patented technology that allows the subwoofer to produce even more bass while maintaining a clear and precise midrange response. This subwoofer also has a cast aluminum frame that can handle high power loads.

It’s constructed with a high-quality polymer composite, which makes it sturdy and durable, but also light in weight.

Another key feature is the R-W10D4’s overhung voice coil system. This design is ideal for producing deep bass at low volumes, as the sub is able to create greater force with less movement. This allows the driver to work at a lower volume and still produce deep bass.

With a sensitivity of 82.4dB and a frequency response of 26 – 200Hz, this subwoofer is capable of producing deep bass at a reasonable price.

7. Dayton Audio RSS265HO-44

The Dayton Audio RSS265HO-44 is our pick for the best 10 inch subwoofer because this subwoofer has a ton of features that are sure to make it the best choice for your next subwoofer purchase.

The Dayton Audio RSS265HO-44 is a small, powerful subwoofer that packs a punch with its 600-watt RMS output and 1200-watt peak power handling. it’s also a great option for smaller rooms where larger subs might be overkill.

It features dual 4-ohm voice coils that allow for several different wiring options, and it comes equipped with dual high-power shorting rings, triple-shorting rings, and a pair of terminals for additional speaker connections. This is a great sub for use in vehicles, as it’s designed to fit in the space under your seats or backrests.

The motor is vented for maximum efficiency, which keeps it from compressing or distorting at higher frequencies. A very strong aluminum cone is also used to protect the motor from breaking when it is under a lot of pressure.

8. Skar Audio SDR-10 D4

The Skar Audio SDR-10 D4 is a dual-powered 10-inch car subwoofer with a peak power of 1,200 watts and an RMS power of 600 watts. This can be used as a front or rear subwoofer depending on your preference.

The speaker comes with a 2.5″ 4-layer high temperature copper voice coil, a high-roll foam surround, and a competition grade pressed paper cone. The high performance voice coil ensures that the speaker can provide a clear bass response.

Skar Audio also uses an advanced cooling system that ensures optimal performance and longevity. This system includes heat fins and a powerful fan that delivers high air flow, allowing the SDR-10 to operate at higher power levels than competing subs.

The SDR-10 features a high-end motor with a low profile design and has a ferrite motor core to increase efficiency. This is a critical feature for a subwoofer, since they are often the largest component in your system. 

9. Infinity REF1000S – Best 10 Inch Shallow Mount Subwoofer

The Infinity REF1000S is a 10″ subwoofer that has all of the features you would expect from a high-quality car audio product. It’s designed to be lightweight, portable, and versatile. It’s also powerful enough to produce a deep bass response.

The REF1000S is a shallow mount subwoofer, so it can fit into any vehicle. Its small footprint means it won’t take up much space in your car, but it still packs a serious punch.

This subwoofer also features the Harman-proprietary SSI (Selectable Smart Impedance), which allows you to switch between a high-quality and a low-quality impedance load, based on your speaker configuration and where you want to place the subwoofer. This is great for people who want a sub with a high quality load, but don’t want to sacrifice bass response for that convenience.

The frequency response range is 35Hz – 175Hz, which means it can cover just about everything you need. You won’t find a more versatile subwoofer in its class, so you can rest assured that you’ll get the most out of your car audio system.

With a sensitivity of 89dB at 1m, it can easily drive a pair of high-quality speakers without distortion. This is a great feature for anyone who wants to enjoy their music on the go, as it will fill a room with rich, deep bass.

10. BOSS Audio Systems CXX10 – Cheap 10 Inch Subwoofer

The CXX10 features a sealed enclosure and can handle large amounts of power (800 watts). This means it can be used in a variety of situations, from a small car to a truck. It’s the ideal subwoofer for anyone who needs powerful, long-lasting sound without a lot of hassle.

The CXX10 is a great option for people who like to listen to music on their way to work. The subwoofer has a resonant frequency of 38 Hz, which is perfect for music and movies.

It features a high-quality polypropylene cone and a voice coil with a rubber surround, which makes it a great choice for any vehicle.

The CXX10 comes with an included bracket that can be mounted anywhere you want, inside or outside your vehicle. There are also mounting holes that can be used to secure the unit to a roof rack or similar mount. This means you can use it anywhere you want, as long as you have a suitable bracket.

Related: Best 15-Inch Subwoofers for the Money

What Features Should You Look for in a 10″ Subwoofer?

If you’re a fan of loud and heavy bass, you need to have a subwoofer in your car audio system. A 10″ subwoofer is the most common size for cars, but it is still important to choose the right one for your needs. Here are some of the most important features to look for in a 10″ subwoofer:

Frequency Range

This is how low the sub can go, measured in Hertz (Hz). The lower the frequency range, the more powerful the bass. If you want lots of low-end thump, get a sub with a low frequency range.

Sensitivity

Sensitivity is an important factor when it comes to any type of speaker. The higher a speaker’s sensitivity rating, the louder it plays with less power from your receiver or amplifier. If you want to get the best sound possible without having to use more power, choose a subwoofer with a high sensitivity rating (usually over 90 dB).

Power Handling

Power handling refers to the amount of power that a subwoofer can handle. You always need to match the power handling of your amplifier or stereo receiver with the power handling of your subwoofer. A good rule of thumb is that if you have an amplifier that puts out 300 watts RMS, then your subwoofer should be rated for at least 300 watts RMS.

Enclosure Type

You can have either a sealed or ported enclosure. A sealed enclosure is great for those who enjoy a clean, tight sound. They are especially great at reproducing the low bass notes in your music.

A vented enclosure, on the other hand, amplifies the bass output over a larger range, which means more boom for your buck. This option is better for those who enjoy that deep, pounding bass that you feel rather than hear.

Dual Voice Coils

For the best sound from your 10-inch subwoofer, look for one with dual voice coils. The voltage in the coils acts like a magnet to move the cone of your speaker. Dual coils allow you to drive each coil with different signals, enabling more flexibility in how you set up your audio system. You can wire them in series or parallel to achieve certain effect.

FAQs

Do 10 Inch Subs Sound Better than 12?

In a car audio system, the subwoofer is usually responsible for reproducing low-frequency sounds (bass). The size and power handling abilities of a subwoofer are often based on how much space there is in the car.

When it comes to choosing between 10-inch or 12-inch car subs, there’s no clear winner. Each has its own advantages and disadvantages.

Generally speaking, subwoofers with larger cones (10 inches or more) can generally produce more bass output than smaller models. However, this is not always true as it also depends on other factors, such as the efficiency of the subwoofer and enclosure design.

It’s usually easier to put in 10-inch subs than it is to put in bigger subs because they can fit into smaller spaces and are lighter in weight.

12-inch subs, on the other hand, are usually able to handle more power than 10-inch subs because they have a bigger cone surface area.

How Do You Make a 10 Inch Sub Hit Harder?

There are several tricks for making 10-inch subwoofers hit harder, though most of them are not easily noticeable to the untrained ear. While many focus on the amplifier or subwoofer itself, it is primarily about the box.

Subwoofers need a box that is designed for their size and specifications. If you have installed a subwoofer in a normal speaker box, you will notice that it is not as loud as you would expect. The first step towards making your subwoofer hit harder is to make sure you have an appropriate box.

The next step to making your 10″ subwoofer hit harder is to make sure there are no rattles or buzzes coming from any part of the system. Any rattling or buzzing will take away from the deep tones produced by your system, and it can potentially cause damage to your speakers. Tighten down any screws and bolts and make sure the mounting surface is solid to prevent these vibrations.

Finally, if the box and all other parts of your system are fine, you may want to consider a new amplifier. If you have had your present amplifier for more than five years, it may be time to replace it with one that puts out more power. The extra power will help your subwoofer produce deeper tones.

How Many Watts Does a 10-Inch Sub Need?

A 10-inch sub will require approximately 150 watts of recommended power.

What Size Amp Do You Need for a 10 Inch Sub?

Before you start researching, it’s important to establish how much power you want for your subwoofer. The first question to ask is what the maximum output (or watts RMS) is allowed in the area where you plan on utilizing the sound system.

10 inch subs can be driven by very small amps at low frequencies. But if you want your sub to really hit hard, you’ll need more power. Here’s the math to figure out how big of an amp you will need based on your sub specifications and what frequency it is rated for.

Most 10 inch subs take between 150 and 250 watts RMS per sub. That number is usually printed on a label on the sub and sometimes only in the instruction manual that comes with it.

For example, you have 2 subs. Each has an RMS rating of 100 watts. To find the amp rating you need, you multiply the subs’ rms ratings together and then double them. 2×2=4 200×2=400 watt amp rating should be enough.

Conclusion

So hope you got your best 10 inch car subwoofer for deep bass, which will give you massive bass and sound. But if you think that these are not enough, then you can also pair these subwoofers with the amplifier to get enhanced sound. By using any of these subwoofers, your car will get a new look when it’s on the road because of the big sound.

Audio Loli
Logo